Skip to content
Legislation Monitor

Asbestos Risk Assessment and Control Measures – How to Manage and Control Asbestos COP 2021

High severity
QLD · Codes of Practice Work Health and Safety Act 2011 (Qld) > Codes of Practice > Asbestos > Risk Control
The obligation
PCBUs must eliminate exposure to airborne asbestos so far as is reasonably practicable, otherwise minimise it, and ensure the asbestos exposure standard is not exceeded.
If eliminating a risk is not reasonably practicable, the most effective reasonably practicable controls must be implemented under the hierarchy of control measures and kept effective over time. Control measures should be reviewed to ensure they are working as planned. Any control should make workers aware of asbestos and prevent work that might expose them or others to airborne asbestos, with particular attention to inaccessible areas in the register such as wall cavities and ceiling spaces. …
What
PCBUs must eliminate exposure to airborne asbestos so far as is reasonably practicable, otherwise minimise it, and ensure the asbestos exposure standard is not exceeded.
Source
worksafe.qld.gov.au

Full analysis

Free account

What this means for you

Free account

Read the full analysis, tailored to your industry

  • Impact summary tailored to your industry
  • Full plain-English analysis of what changed
  • Email alerts & digests when this law changes
  • Compliance self-assessment tools
Labels
asbestos risk assessment hierarchy of controls air monitoring health surveillance
Official sources
Frequently asked questions

Which WHS law does this come from?

Asbestos Risk Assessment and Control Measures – How to Manage and Control Asbestos COP 2021 is a WHS requirement set out in How to manage and control asbestos 2021 (QLD). It is made under Work Health and Safety Act 2011 (QLD). The relevant provision is Work Health and Safety Act 2011 (Qld) > Codes of Practice > Asbestos > Risk Control.

What does this WHS obligation require?

Asbestos Risk Assessment and Control Measures – How to Manage and Control Asbestos COP 2021 is a WHS obligation under How to manage and control asbestos 2021 (QLD). In short, PCBUs must eliminate exposure to airborne asbestos so far as is reasonably practicable, otherwise minimise it, and ensure the asbestos exposure standard is not exceeded.

What changed recently?

Asbestos Risk Assessment and Control Measures – How to Manage and Control Asbestos COP 2021 was last updated on 19 October 2026.

About this Topic

Updates trackedMonitoring
Monitoring detail
First seenOct 2026