The obligation
Principal contractors and erecting PCBUs must prepare an erection method statement, manage exclusion zones, sequence crane lifts, and ensure elements are propped and braced until permanently fixed.
Erection of precast and tilt-up elements is the highest-risk phase. The Code requires an erection method statement prepared by a competent person; exclusion zones around all crane lifts; correct propping and bracing until elements are permanently secured; and verification that foundations and footings can accept loads. Principal contractors must coordinate all trades and ensure no work occurs in exclusion zones during lifts.
- What
- Principal contractors and erecting PCBUs must prepare an erection method statement, manage exclusion zones, sequence crane lifts, and ensure elements are propped and braced until permanently fixed.
- Source
- worksafe.nt.gov.au
description
Full analysis
lock
Free account
tips_and_updates
What this means for you
lock
Free account
lock_open
Read the full analysis, tailored to your industry
- star
Impact summary tailored to your industry
- check_circle
Full plain-English analysis of what changed
- check_circle
Email alerts & digests when this law changes
- check_circle
Compliance self-assessment tools
Labels
erection
crane
exclusion zone
propping
bracing
method statement
Official sources
Frequently asked questions
Which WHS law does this come from?
Erection of precast and tilt-up elements is a WHS requirement set out in Precast tiltup and concrete elements in building construction (NT). It is made under Work Health and Safety (National Uniform Legislation) Act 2011 (NT). The relevant provision is Precast tiltup and concrete elements in building construction > Erection.
What does this WHS obligation require?
Erection of precast and tilt-up elements is a WHS obligation under Precast tiltup and concrete elements in building construction (NT). In short, Principal contractors and erecting PCBUs must prepare an erection method statement, manage exclusion zones, sequence crane lifts, and ensure elements are propped and braced until permanently fixed.
What changed recently?
Erection of precast and tilt-up elements was last updated on 26 August 2026.
