The obligation
The Code restricts and imposes strict conditions on energised electrical work. Such work is only permitted where de-energising is not reasonably practicable, and must be performed by a licensed electrician using appropriate PPE and safe work procedures.
The Code adopts a strong preference for de-energising electrical equipment before work. Energised (live) electrical work is only permitted where it is not reasonably practicable to de-energise or where de-energising creates a greater risk. Where permitted, energised work must only be performed by a licensed electrician following a documented safe work procedure, using appropriate insulated tools and PPE, and with another person in attendance.
…
- What
- The Code restricts and imposes strict conditions on energised electrical work. Such work is only permitted where de-energising is not reasonably practicable, and must be performed by a licensed electrician using appropriate PPE and safe work procedures.
- Source
- worksafe.nt.gov.au
description
Full analysis
lock
Free account
tips_and_updates
What this means for you
lock
Free account
lock_open
Read the full analysis, tailored to your industry
- star
Impact summary tailored to your industry
- check_circle
Full plain-English analysis of what changed
- check_circle
Email alerts & digests when this law changes
- check_circle
Compliance self-assessment tools
Labels
electrical
live work
energised work
licensed electrician
Official sources
Frequently asked questions
Which WHS law does this come from?
Requirements for Energised (Live) Electrical Work is a WHS requirement set out in Managing electrical risks in the workplace (NT). It is made under Work Health and Safety (National Uniform Legislation) Act 2011 (NT). The relevant provision is WHS Act (NT) > Codes of Practice > Managing Electrical Risks > Energised Electrical Work.
What does this WHS obligation require?
Requirements for Energised (Live) Electrical Work is a WHS obligation under Managing electrical risks in the workplace (NT). In short, The Code restricts and imposes strict conditions on energised electrical work. Such work is only permitted where de-energising is not reasonably practicable, and must be performed by a licensed electrician using appropriate PPE and safe work procedures.
What changed recently?
Requirements for Energised (Live) Electrical Work was last updated on 26 August 2026.
