The obligation
The Code sets out a systematic process: identify hazards, assess risks if necessary, control risks and review control measures.
A risk assessment is not mandatory for hazardous noise under the WHS Regulations, but is often the best way to decide which control measures to implement. PCBUs must carry out hazard identification in consultation with workers and their health and safety representatives. Where hazardous noise is identified, the PCBU should carry out a noise assessment unless exposures can be reduced below the standard immediately.
…
- What
- The Code sets out a systematic process: identify hazards, assess risks if necessary, control risks and review control measures.
- Source
- safeworkaustralia.gov.au
description
Full analysis
lock
Free account
tips_and_updates
What this means for you
lock
Free account
lock_open
Read the full analysis, tailored to your industry
- star
Impact summary tailored to your industry
- check_circle
Full plain-English analysis of what changed
- check_circle
Email alerts & digests when this law changes
- check_circle
Compliance self-assessment tools
Frequently asked questions
Which WHS law does this come from?
Process for managing noise and preventing hearing loss is a WHS requirement set out in Managing noise and preventing hearing loss at work (FEDERAL). It is made under Work Health and Safety Act 2011 (FEDERAL). The relevant provision is WHS Act > WHS Regulation Part 3.1 > Noise CoP s1.2, s3-4.
What does this WHS obligation require?
Process for managing noise and preventing hearing loss is a WHS obligation under Managing noise and preventing hearing loss at work (FEDERAL). In short, The Code sets out a systematic process: identify hazards, assess risks if necessary, control risks and review control measures.
What changed recently?
Process for managing noise and preventing hearing loss was last updated on 19 October 2026.